TrustSeal Verified

Bitumen Testing Apparatus

Bitumen Penetration Test Apparatus

Bitumen Penetration Test Apparatus

Approx. Rs 24,000 / Piece


Quality Standard : As Per IS 1203

Bitumen Penetration Test Apparatus are used for testing bitumen, tar, cement and soils. A Chosen force is applied over a given area for a known period of time and the depth of penetration or the depression made in the sample is measured in tenths of a millimeter which is expressed as a penetration number. An accurately machined aluminium base with in- set spirit level in these bitumen penetration test apparatus has been designed to facilitate penetration tests to be made over a wide surface area of sample, Adjustable feet are provided in the base for leveling and a head support, mounted on a vertical rod which can be adjusted for head, a rack & pinion and pointer assembly provides for fine adjustments of needle or cone tip to sample incorporated a slipping clutch mechanism which makes reading of penetration and subsequent resetting a simple and accurate operation. Each Penetrometer is supplied with a Plunger and Needle weighing 50g for testing bituminous products, one of each 50gm & 100gm weights, and one of each aluminium sampling containers 55mm dia x 53mm ht & 55mm dia x 35mm ht.

Technical Specifications:

Cat No. & NameDescription
AT-226-1: Bitumen PenetrometerBitumen Penetrometer Manually Operated, including adjustable weight arrangement & standard accessories.
AT-226-2: Bitumen PenetrometerAutomatic Bitumen Penetrometer Electrically Operated (Automatic 5 Seconds Timer), including adjustable weight arrangement & standard accessories.

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.
AT-226-3: Bitumen PenetrometerAutomatic Bitumen Penetrometer Electrically Operated (Digital Timer), including adjustable weight arrangement & standard accessories.

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.

Additional Information:

Ring And Ball Test Apparatus

Ring And Ball Test Apparatus

Approx. Rs 18,000 / Piece


Quality Standard : As Per IS 1205

Ring & Ball (Softening Point) Test Apparatus is used for determination of softening point of bituminous materials. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test conditions.

Specifications:

Cat No. & Name

Description
AT-229: Ring & Ball Test ApparatusRing and Ball apparatus (Softening Point) test apparatus manually operated with Borosil Beaker 600ml capacity, tapered rings, ball centering guides, steel balls (9.5mm dia).
AT-230: Ring & Ball Test ApparatusRing and Ball apparatus (Softening Point) test apparatus electrically operated (Stirring Arrangement) with Borosil Beaker 600ml capacity, tapered rings, ball centering guides, steel balls (9.5mm dia), Stirring Rod and Heater.

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.

Modified Marshal Stability Test Apparatus

Modified Marshal Stability Test Apparatus

Approx. Rs 90,000 / Set


Quality Standard : As Per ASTM-D-1559

The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and aggregate upto 25.4 mm maximum sizes. The marshal stability test apparatus consists of following:

Specification :
Technical Specifications:
Cat No & NameDescription
AT-235-1.7: Filter PaperFilter Paper for Marshall Stability test 100mm Dia Pack of 100 Circles.
AT-235-2.7: Filter PaperFilter Paper for Marshall Stability test 150mm Dia Pack of 100 Circles.
AT-094: Bitumen Sample ExtractorHydraulic Extractor Manually Operated for extracting Bitumen samples. Supplied complete with 100mm adaptor & 150mm adaptor.

Additional Information:

Marshal Stability Test Apparatus

Marshal Stability Test Apparatus

Approx. Rs 75,000 / Set


Quality Standard : As Per ASTM-D-1559

The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and aggregate upto 25.4 mm maximum sizes. The marshal stability test apparatus consists of following:

Specifications:


Additional Information:

Bitumen Extraction Test Apparatus

Bitumen Extraction Test Apparatus

Approx. Rs 21,000 / Piece


For determining bitumen percentage in Bituminous paving mixtures. Bitumen Extraction Test Apparatus has a removable, precision machined, aluminium rotor bowl, mounted on a vertical shaft. A filter paper disc is pressed in-between the rotor bowl and cover plate by tightening a knurled nut. The bowl assembly is enclosed in a housing operating model; the rotor bowl is coupled to a motor. The solvent may be introduced during test through a cup on the housing cover. The apparatus is supplied complete with a Pack (50 Circles) of Filter Paper.

Specifications:

Cat No. & NameDescription
AT-236-1: Bitumen Extraction Test ApparatusCentrifuge type Bitumen extraction apparatus 1500gm capacity Manually Operated with the pack of Filter Paper (50 Circles).
AT-236-2: Bitumen ExtractionCentrifuge type Bitumen extraction apparatus 3000gm capacity
Test ApparatusManually Operated with the pack of Filter Paper (50 Circles).
AT-237-1: Bitumen Extraction Test ApparatusCentrifuge type Bitumen extraction apparatus 1500gm capacity Electrically Operated having Dimmerstat for controlling speed from 2400 to 3600rpm with the pack of Filter Paper (50 Circles).
AT-237-2: Bitumen Extraction Test ApparatusCentrifuge type Bitumen extraction apparatus 3000gm capacity Electrically Operated having Dimmerstat for controlling speed from 2400 to 3600rpm with the pack of Filter Paper (50 Circles).

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.

Flash And Fire Point Apparatus

Flash And Fire Point Apparatus

Approx. Rs 13,000 / Piece


Quality Standard : As Per IS 1209

Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having the oil test jet flame device, the stirrer with the flexible shaft. The assembly rests in Air Bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having the electric heater with the temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply.

Specifications:


Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Bitumen Testing Apparatus ?

    country-ico

    We will contact you soon !

    Rajat Bhatia

    (CEO)

    Accro-Tech Scientific Industries

    Mansarover Garden, New Delhi, Delhi, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback