Compression Testing Equipment Electrically cum Manually (Hand) Operated. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the load gauge reading. The electrically operated pumping units are also fitted with hand operated pump.

Specifications:

• Power Source: AC 360 V
• Hydraulic Pump Rated Pressure: 45 MPa
• Piston Stroke: 50 mm, 100 mm
• Test Force Measuring Range: 4%-100% Fs

Specifications:

• Max. Testing Power: 1000 kn/2000 kn
• Max. Piston Stroke: 80 mm
• Max. Piston Lift Speed: 55 mm/Min
• Noise: ≤80 dB

Electrically Cum Manually Compression Testing Equipment operated fitted with Two load gauges

Specifications:

(2 Pillar Model): Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.

Specifications:

• Capacity (In kN): 1000 kN
• Pressure Gauge (In kN): 1000 kN
• Least Count (In kN): 5 kN
• Pressure Gauge Diameter (mm): 150
• Vertical Daylight (mm): 320 (Adj)
• Horizontal Clearance (mm): 260
• Platen Size (mm): 220 x 165
• Ram Diameter (mm): 165
• Ram Travel (mm): 50
• Cube: 100mm, 150 mm
• Cylindrical: 100 mm x 200 mm, 150 mm x 300 mm
• Brick: 100 x 100 x 220 mm

Cat. No.

Specifications:

Manual Compression Testing Machine fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.

Specifications:

• Capacity: 100 t
• Hand operated fitted with 15 cm Dia load gauge
• Designed for testing of cement, concrete moulds of various size 15x30 cm cubes, 7.06x7.06 cubes, 15x15 cm cylindrical mould, bricks can also be tested with the help of adjustable hand wheel

Compression Testing Machine electrically cum manually (hand) operated fitted with three load gauges.

Specifications:

• Max capacity: 2000 kn
• Accuracy Grade: 1
• Voltage: 210-220V

Specifications:

Specifications:

Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.

Specifications:

Specifications: